Thank you for the link nevsehir

____________

Well darn it all we've hit a snag.    I have Poser Pro 2010. All the morphs and dials are not responding.   So unless you can transfer to a pz3 file or make it backwards compatible we are at a snag. Because others will not be able to use it.  

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.

tda42 wrote: [View Post]

Well darn it all we've hit a snag.    I have Poser Pro 2010. All the morphs and dials are not responding.   So unless you can transfer to a pz3 file or make it backwards compatible we are at a snag. Because others will not be able to use it.  

hmm ill see, i have pp12 so i dont know if its backward compatible:)

hopefully it will work with the pz3 file

http://www.2shared.com/file/4UYBIDqy/posette.html

Welp! Back to the Mad Scientist's Lab.  

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.

Ok. I am afraid we still have a problem. Have you taken the P4 character and reworked the mesh. If so you might need to make another cr2 under a different name. It seems to me at this point it is not recognizing  the cr2 with morphs you have made. But yet reverting back to the standard P4. However! The morph Dials are there. They just don't work with a different Poser such as mine. So there is something that the 2012 is doing, the 2010 is not. If you have a Poser that is around the Poser 7 or 8 era, then this will help the others. Even if you get this working in yours the bad part is all your efforts won't work with the others on back. At the moment I suggest to stop until this is resolved.   But I will bet it is in the writing of the cr2 file that makes it different.  

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.

tda42 wrote: [View Post]

Ok. I am afraid we still have a problem. Have you taken the P4 character and reworked the mesh. If so you might need to make another cr2 under a different name. It seems to me at this point it is not recognizing  the cr2 with morphs you have made. But yet reverting back to the standard P4. However! The morph Dials are there. They just don't work with a different Poser such as mine. So there is something that the 2012 is doing, the 2010 is not. If you have a Poser that is around the Poser 7 or 8 era, then this will help the others. Even if you get this working in yours the bad part is all your efforts won't work with the others on back. At the moment I suggest to stop until this is resolved.   But I will bet it is in the writing of the cr2 file that makes it different.  

it is just p4 female. hmm i dont have Poser 8 anymore. only pp10 and pp12. the pz3 file and the cr2 file both work for me.

I can dial and do anything like i can with just Posette or any other figure

Ok that is a start. Try Poser Pro 2010. That way you have isolated this from the other software. The reason why it is working is because it is in your software runtime. Take the pz3 and put it in another Poser such as 10 and you should get the same results as myself. This is making it either work like 12 is doing or working like mine is in 10.

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.

MM i opened up the cr2 file. it is refering to pmd files. Do you think it will work if i upload the pmd with it?

In order for you to trouble shoot to see if you are missing something is to have an older software on stand-by to see if it is indeed working on every Poser that is out there. The only software that may not be able to load all is 4. But even some may load it like in Poser Pro 4. As for an older software it should report a missing file. If the character is taking a long time to load then it is hunting for something. I would say your morphs would indeed be a part of that factor.

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.

I never had so much trouble with a character like this :S. i dont have any old Poser software anymore

hmm i did what you suggested, i deleted everything and you are right the dials are there but nothing is changing, maybe it is the pmd? i dont know

what i now do is load a blank Posette, apply all the morphs again and it still works. but i did that with the file i uploaded too/

UPdate:

In order for you to trouble shoot to see if you are missing something is to have an older software on stand-by to see if it is indeed working on every Poser that is out there. The only software that may not be able to load all is 4. But even some may load it like in Poser Pro 4. As for an older software it should report a missing file. If the character is taking a long time to load then it is hunting for something. I would say your morphs would indeed be a part of that factor. It is the soul reason to have another for you to test. That is why you see Beta Testers out side of the persons PC is to test to see if anything goes wrong. Another person would be Andreas but he only has Poser Pro 4. Davide would be the next choice to ask in this project.  

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.

i think it is the pmd, it uses the morph information, i have it now unticked. i will upload a new file tomorrow.

Here is the test and it works. This is my texture with the girl. I made it for a SciFi Theme a while a go.  

____________
Two wrongs don't make a right.
But six left turns will get you around the block
and back in the driveway again.